资源类型

期刊论文 28

年份

2023 3

2021 4

2020 4

2019 1

2018 1

2017 2

2016 4

2014 2

2011 1

2010 1

2009 3

2003 1

展开 ︾

关键词

侵彻深度 1

圆柱 1

圈梁 1

填充构件 1

增材制造 1

大开间少墙单面走廊砌体结构 1

屈曲 1

延性 1

拓扑优化 1

构造柱 1

正交直墙 1

窗间墙 1

薄壁弹体 1

辐射阻尼 1

钢筋混凝土 1

镜像原理 1

附加质量 1

展开 ︾

检索范围：

排序： 展示方式：

Seismic fragility assessment of revised MRT buildings considering typical construction changes

Rakesh DUMARU, Hugo RODRIGUES, Humberto VARUM

《结构与土木工程前沿（英文）》 2020年 第14卷 第1期   页码 241-266 doi: 10.1007/s11709-019-0560-4

摘要： The present study investigates the vulnerability assessment of the prototype revised Mandatory Rule of Thumb (MRT) buildings initially designed and detailed for three storeys bare frame building; later modified through variable number of storeys (three, four, and five) and different arrangement of infill walls (bare frame, soft-storey, irregular infilled, and fully infilled). The application of infill walls increases the fundamental frequencies, stiffness, and maximum strength capacity, but reduces the deformation capability than the bare frame building. The vulnerability was also reduced through infill walls, where the probability of exceeding partial-collapse and collapse damage reduced by 80% and 50%, respectively. Furthermore, the increased in storeys (three to five) also increases the failure probability, such that partial-collapse and collapse for fully infilled increases by almost 55% and 80%, respectively. All obtained results and discussions concluded that the structural sections and details assigned for MRT building is not sufficient if considered as bare frame and soft-storey. And increase in number of storeys causes building highly vulnerable although the infill walls were considered.

关键词： mid-rise buildings     revised NBC 205: 2012     masonry infill walls     configurations of infill walls     vulnerability assessment and inter-storey drift    

HTML PDF 收藏

Mechanical properties characterization of different types of masonry infill walls

André FURTADO, Hugo RODRIGUES, António ARÊDE, Humberto VARUM

《结构与土木工程前沿（英文）》 2020年 第14卷 第2期   页码 411-434 doi: 10.1007/s11709-019-0602-y

摘要： It is remarkable, the recent advances concerning the development of numerical modeling frameworks to simulate the infill panels’ seismic behavior. However, there is a lack of experimental data of their mechanical properties, which are of full importance to calibrate the numerical models. The primary objective of this paper is to present an extensive experimental campaign of mechanical characterization tests of infill masonry walls made with three different types of masonry units: lightweight vertical hollow concrete blocks and hollow clay bricks. Four different types of experimental tests were carried out, namely: compression strength tests, diagonal tensile strength tests, and flexural strength tests parallel and perpendicular to the horizontal bed joints. A total amount of 80 tests were carried out and are reported in the present paper. The second objective of this study was to compare the mechanical properties of as-built and existing infill walls. The results presented and discussed herein, will be in terms of strain-stress curves and damages observed within the tests. It was observed a fragile behavior in the panels made with hollow clay horizontal bricks, without propagation of cracks. The plaster increased the flexural strength by 57%.

关键词： masonry infill walls     experimental characterization     compression strength     shear diagonal strength     flexural strength    

HTML PDF 收藏

Robust design of configurations and parameters of adaptable products

Jian ZHANG,Yongliang CHEN,Deyi XUE,Peihua GU

《机械工程前沿（英文）》 2014年 第9卷 第1期   页码 1-14 doi: 10.1007/s11465-014-0296-8

摘要：

An adaptable product can satisfy different customer requirements by changing its configuration and parameter values during the operation stage. Design of adaptable products aims at reducing the environment impact through replacement of multiple different products with single adaptable ones. Due to the complex architecture, multiple functional requirements, and changes of product configurations and parameter values in operation, impact of uncertainties to the functional performance measures needs to be considered in design of adaptable products. In this paper, a robust design approach is introduced to identify the optimal design configuration and parameters of an adaptable product whose functional performance measures are the least sensitive to uncertainties. An adaptable product in this paper is modeled by both configurations and parameters. At the configuration level, methods to model different product configuration candidates in design and different product configuration states in operation to satisfy design requirements are introduced. At the parameter level, four types of product/operating parameters and relations among these parameters are discussed. A two-level optimization approach is developed to identify the optimal design configuration and its parameter values of the adaptable product. A case study is implemented to illustrate the effectiveness of the newly developed robust adaptable design method.

关键词： adaptable product     robust design     optimization     uncertainties    

HTML PDF 收藏

Concurrent optimization of structural topology and infill properties with a CBF-based level set method

Long JIANG, Yang GUO, Shikui CHEN, Peng WEI, Na LEI, Xianfeng David GU

《机械工程前沿（英文）》 2019年 第14卷 第2期   页码 171-189 doi: 10.1007/s11465-019-0530-5

摘要： In this paper, a parametric level-set-based topology optimization framework is proposed to concurrently optimize the structural topology at the macroscale and the effective infill properties at the micro/meso scale. The concurrent optimization is achieved by a computational framework combining a new parametric level set approach with mathematical programming. Within the proposed framework, both the structural boundary evolution and the effective infill property optimization can be driven by mathematical programming, which is more advantageous compared with the conventional partial differential equation-driven level set approach. Moreover, the proposed approach will be more efficient in handling nonlinear problems with multiple constraints. Instead of using radial basis functions (RBF), in this paper, we propose to construct a new type of cardinal basis functions (CBF) for the level set function parameterization. The proposed CBF parameterization ensures an explicit impose of the lower and upper bounds of the design variables. This overcomes the intrinsic disadvantage of the conventional RBF-based parametric level set method, where the lower and upper bounds of the design variables oftentimes have to be set by trial and error. A variational distance regularization method is utilized in this research to regularize the level set function to be a desired distance-regularized shape. With the distance information embedded in the level set model, the wrapping boundary layer and the interior infill region can be naturally defined. The isotropic infill achieved via the mesoscale topology optimization is conformally fit into the wrapping boundary layer using the shape-preserving conformal mapping method, which leads to a hierarchical physical structure with optimized overall topology and effective infill properties. The proposed method is expected to provide a timely solution to the increasing demand for multiscale and multifunctional structure design.

关键词： concurrent topology optimization     parametric level set method     cardinal basis function     shell-infill structure design     conformal mapping    

HTML PDF 收藏

Slender reinforced concrete shear walls with high-strength concrete boundary elements

《结构与土木工程前沿（英文）》 2023年 第17卷 第1期   页码 138-151 doi: 10.1007/s11709-022-0897-y

摘要： Reinforced concrete structural walls are commonly used for resisting lateral forces in buildings. Owing to the advancements in the field of concrete materials over the past few decades, concrete mixes of high compressive strength, commonly referred to as high-strength concrete (HSC), have been developed. In this study, the effects of strategic placement of HSC on the performance of slender walls were examined. The finite-element model of a conventional normal-strength concrete (NSC) prototype wall was validated using test data available in extant studies. HSC was incorporated in the boundary elements of the wall to compare its performance with that of the conventional wall at different axial loads. Potential reductions in the reinforcement area and size of the boundary elements were investigated. The HSC wall exhibited improved strength and stiffness, and thereby, allowed reduction in the longitudinal reinforcement area and size of the boundary elements for the same strength of the conventional wall. Cold joints resulting from dissimilar concrete pours in the web and boundary elements of the HSC wall were modeled and their impact on behavior of the wall was examined.

关键词： slender walls     high-strength concrete     rectangular and barbell-shaped walls     cold joints    

HTML PDF 收藏

Behaviour of self-centring shear walls——A state of the art review

《结构与土木工程前沿（英文）》 2023年 第17卷 第1期   页码 53-77 doi: 10.1007/s11709-022-0850-0

摘要： The application of unbonded post-tensioning (PT) in structural walls has led to the development of advanced self-centring (rocking) shear wall systems that has significant advantages, including accelerated construction due to the incorporation of prefabricated elements and segmental construction for different materials (e.g., concrete, masonry, and timber), reduced residual drifts, and little damage upon extreme seismic and wind loads. Concrete, masonry, and timber are often used for the construction of unbonded PT structural wall systems. Despite extensive research since the 1980s, there are no well-established design guidelines available on the shear wall configuration with the required energy dissipation system, joint’s locations and acceptance criteria for shear sliding, confinement, seismic performance factors, PT loss, PT force range and residual drifts of shear walls subjected to lateral loads. In this research a comprehensive state-of-the-art literature review was performed on self-centring shear wall system. An extensive study was carried out to collect a database of 100 concrete, masonry, and self-centring shear wall tests from the literature. The established database was then used to review shear walls’ configurations, material, and components to benchmark requirements applicable for design purposes. The behaviour of concrete, masonry and timber shear walls were compared and critically analysed. The general behaviour, force-displacement performance of the walls, ductility, and seismic response factors, were critically reviewed and analysed for different self-centring wall systems to understand the effect of different parameters including configurations of the walls, material used for construction of the wall (concrete, masonry, timber) and axial stress ratio. The outcome of this research can be used to better understand the behaviour of self-centring wall system in order to develop design guidelines for such walls.

关键词： self-centring shear walls     rocking walls     energy dissipation     seismic performance factors     PT loss     residual drift    

HTML PDF 收藏

Self-centring segmental retaining walls—A new construction system for retaining walls

《结构与土木工程前沿（英文）》 2021年 第15卷 第4期   页码 980-1000 doi: 10.1007/s11709-021-0737-5

摘要： This paper reports on an experimental study on a new self-centring retaining wall system. Four post-tensioned segmental retaining walls (PSRWs) were experimentally tested. Each of the walls was constructed using seven T-shaped concrete segments with a dry stack. The walls were tested under incrementally increasing cyclic lateral load. The effect of the wall height, levels of post-tensioning (PT) force, and bonded versus unbonded condition of PT reinforcement on the structural behavior of the PSRWs was investigated. The results showed that such PSRWs are structurally adequate for water retaining structures. According to the results, increasing the wall height decreases initial strength but increases the deformation capacity of the wall. The larger deformation capacity and ductility of PSRW make it a suitable structural system for fluctuating loads or deformation, e.g., seawall. It was also found that increasing the PT force increases the wall’s stiffness; however, reduces its ductility. The residual drift and the extent of damage of the unbonded PSRWs were significantly smaller than those of the bonded ones. Results suggest that this newly developed self-centring retaining wall can be a suitable structural system to retain lateral loads. Due to its unique deformation capacity and self-centring behavior, it can potentially be used for seawall application.

关键词： retaining wall     segmental     precast concrete     unbonded post-tensioning     water retaining wall     seawall    

HTML PDF 收藏

Performance evaluation of waste electrical and electronic equipment disassembly layout configurations

Ozan Capraz, Olcay Polat, Askiner Gungor

《环境科学与工程前沿（英文）》 2017年 第11卷 第5期 doi: 10.1007/s11783-017-0992-9

摘要： Recycling of waste electrical and electronic equipment (WEEE) is crucially important since it handles hazardous waste according to ever tightening laws and regulations and it adds benefits to economy and sustainable environment. Disassembly is one of the most important processes performed during the recovery of WEEE. The overall goal of disassembly is to maximize the retrieval of various metals and plastics contained in WEEE in order to reduce their negative effects on human health and environmental sustainability and to increase economic gains. This study aims to evaluate alternative layout configurations for WEEE disassembly systems (WDS). In this context, various configurations were compared in terms of pre-defined performance criteria, such as the total number of disassembled WEEE and the total revenue from sales, using simulation models. The results of this study show that the performance of a WDS was significantly affected by output transfer systems along with the specialization of operators on certain types of WEEE.

关键词： WEEE     Recovery     Disassembly     Layout planning     Simulation    

HTML PDF 收藏

Experiment and calculation on seismic behavior of RC composite core walls with concealed steel truss

Wanlin CAO , Weihua CHANG , Changjun ZHAO , Jianwei ZHANG ,

《结构与土木工程前沿（英文）》 2009年 第3卷 第3期   页码 255-261 doi: 10.1007/s11709-009-0043-0

摘要： To improve the seismic performance of reinforced concrete core walls, reinforced concrete composite core walls with concealed steel truss were proposed and systemically investigated. Two 1/6 scale core wall specimens, including a normal reinforced concrete core wall and a reinforced concrete composite core wall with concealed steel truss, were designed. The experimental study on seismic performance under cyclic loading was carried out. The load-carrying capacity, stiffness, ductility, hysteretic behavior and energy dissipation of the core walls were discussed. The test results showed that the seismic performance of core walls is improved greatly by the concealed steel truss. The calculated results were found to agree well with the actual measured ones.

关键词： reinforced concrete     steel truss     core walls     seismic performance    

HTML PDF 收藏

Choosing configurations of transmission line tower grounding by back flashover probability value

Dmitry KUKLIN

《能源前沿（英文）》 2016年 第10卷 第2期   页码 213-226 doi: 10.1007/s11708-016-0398-6

摘要： There is a considerable number of works devoted to electrical characteristics of grounding. These characteristics are important in general. However, in application to grounding of transmission line towers they are not enough to determine what grounding construction is preferable in some particular case, because these characteristics are calculated or measured apart from the grounded object, and only limited number of current (or voltage) source waveforms is used. This paper indicates reasons in favor of the fact that to choose the optimum design of grounding, the calculation model should include the tower as it is. The probability of back flashover, which provides both qualitative and quantitative estimate of the grounding structure efficiency, can be taken as the criterion for the grounding design. The insulation flashover probability is calculated on the basis of engineering method, which evaluates breakdown strength of insulation for nonstandard waveshapes, and probability data on lightning currents. Different approaches are examined for identifying the back flashover probability, as not only amplitudes but also other parameters can be taken into account. Finite-difference time-domain method is used for calculations of transients. It is found that lightning current waveform can greatly influence calculated back flashover probability value.

关键词： grounding     transmission line tower     back flashover probability     FDTD method    

HTML PDF 收藏

Seismic effects on reinforcement load and lateral deformation of geosynthetic-reinforced soil walls

《结构与土木工程前沿（英文）》 2021年 第15卷 第4期   页码 1001-1015 doi: 10.1007/s11709-021-0734-8

摘要： Current design methods for the internal stability of geosynthetic-reinforced soil (GRS) walls postulate seismic forces as inertial forces, leading to pseudo-static analyses based on active earth pressure theory, which yields unconservative reinforcement loads required for seismic stability. Most seismic analyses are limited to the determination of maximum reinforcement strength. This study aimed to calculate the distribution of the reinforcement load and connection strength required for each layer of the seismic GRS wall. Using the top-down procedure involves all of the possible failure surfaces for the seismic analyses of the GRS wall and then obtains the reinforcement load distribution for the limit state. The distributions are used to determine the required connection strength and to approximately assess the facing lateral deformation. For sufficient pullout resistance to be provided by each reinforcement, the maximum required tensile resistance is identical to the results based on the Mononobe–Okabe method. However, short reinforcement results in greater tensile resistances in the mid and lower layers as evinced by compound failure frequently occurring in GRS walls during an earthquake. Parametric studies involving backfill friction angle, reinforcement length, vertical seismic acceleration, and secondary reinforcement are conducted to investigate seismic impacts on the stability and lateral deformation of GRS walls.

关键词： geosynthetics     reinforced soil     retaining walls     seismic performance    

HTML PDF 收藏

Cyclic behavior of prefabricated reinforced concrete frame with infill slit shear walls

Kui XIAO,Qilin ZHANG,Bin JIA

《结构与土木工程前沿（英文）》 2016年 第10卷 第1期   页码 63-71 doi: 10.1007/s11709-015-0294-x

摘要： A composite structural system consisting of prefabricated reinforced concrete frame with infill slit shear walls (PRCFW), with good ductility, is a new type of earthquake resistant structure. Pseudo-static tests were performed to evaluate the seismic behavior of the PRCFW system. Two one-bay, two-story PRCFW specimens were both built at one-half scale. Additional computational research is also conducted to enhance the nonlinear analytical capabilities for this system. Combined with the concrete damaged plastic (CDP) model provided by finite element program ABAQUS and the constitutive model of concrete proposed by Chinese code, the damage process of the PRCFW structure under cyclic load is simulated. The simulated results show a good agreement with the test data, the dynamic behavior of the PRCFW system can be simulated sufficiently accurate and efficient to provide useful design information. The experimental and numerical study show that this system has the potential to offer good ductility and energy absorption capacity to dissipate input energy, and stiffness adequate for controlling drift for buildings located in earthquake-prone regions.

关键词： slit shear wall     constitutive model     cyclic     seismic     damage    

HTML PDF 收藏

Modeling of shear walls using finite shear connector elements based on continuum plasticity

Ulf Arne GIRHAMMAR, Per Johan GUSTAFSSON, Bo KÄLLSNER

《结构与土木工程前沿（英文）》 2017年 第11卷 第2期   页码 143-157 doi: 10.1007/s11709-016-0377-3

摘要： Light-frame timber buildings are often stabilized against lateral loads by using diaphragm action of roofs, floors and walls. The mechanical behavior of the sheathing-to-framing joints has a significant impact on the structural performance of shear walls. Most sheathing-to-framing joints show nonlinear load-displacement characteristics with plastic behavior. This paper is focused on the finite element modeling of shear walls. The purpose is to present a new shear connector element based on the theory of continuum plasticity. The incremental load-displacement relationship is derived based on the elastic-plastic stiffness tensor including the elastic stiffness tensor, the plastic modulus, a function representing the yield criterion and a hardening rule, and function representing the plastic potential. The plastic properties are determined from experimental results obtained from testing actual connections. Load-displacement curves for shear walls are calculated using the shear connector model and they are compared with experimental and other computational results. Also, the ultimate horizontal load-carrying capacity is compared to results obtained by an analytical plastic design method. Good agreements are found.

关键词： shear walls     wall diaphragms     finite element modelling     plastic shear connector     analytical modelling     experimental comparison    

HTML PDF 收藏

Effect of earth reinforcement, soil properties and wall properties on bridge MSE walls

《结构与土木工程前沿（英文）》 2021年 第15卷 第5期   页码 1209-1221 doi: 10.1007/s11709-021-0764-2

摘要： Mechanically stabilized earth (MSE) retaining walls are popular for highway bridge structures. They have precast concrete panels attached to earth reinforcement. The panels are designed to have some lateral movement. However, in some cases, excessive movement and even complete dislocation of the panels have been observed. In this study, 3-D numerical modeling involving an existing MSE wall was undertaken to investigate various wall parameters. The effects of pore pressure, soil cohesion, earth reinforcement type and length, breakage/slippage of reinforcement and concrete strength, were examined. Results showed that the wall movement is affected by soil pore pressure and reinforcement integrity and length, and unaffected by concrete strength. Soil cohesion has a minor effect, while the movement increased by 13–20 mm for flexible geogrid reinforced walls compared with the steel grid walls. The steel grid stresses were below yielding, while the geogrid experienced significant stresses without rupture. Geogrid reinforcement may be used taking account of slippage resistance and wall movement. If steel grid is used, non-cohesive soil is recommended to minimize corrosion. Proper soil drainage is important for control of pore pressure.

关键词： mechanically stabilized earth walls     precast concrete panels     backfill soil     finite element modeling     earth reinforcement    

HTML PDF 收藏

Self-centering steel plate shear walls for improving seismic resilience

Patricia M. CLAYTON,Daniel M. DOWDEN,Chao-Hsien LI,Jeffrey W. BERMAN,Michel BRUNEAU,Laura N. LOWES,Keh-Chuan TSAI

《结构与土木工程前沿（英文）》 2016年 第10卷 第3期   页码 283-290 doi: 10.1007/s11709-016-0344-z

摘要： As part of a Network for Earthquake Engineering Simulation research project led by researchers at the University of Washington with collaborators at University at Buffalo, and Taiwan National Center for Research on Earthquake Engineering, a self-centering steel plate shear wall (SC-SPSW) system has been developed to achieve enhanced seismic performance objectives, including recentering. The SC-SPSW consists of thin steel infill panels, referred to as web plates that serve as the primary lateral load-resisting and energy dissipating element of the system. Post-tensioned (PT) beam-to-column connections provide system recentering capabilities. A performance-based design procedure has been developed for the SC-SPSW, and a series of nonlinear response history analyses have been conducted to verify intended seismic performance at multiple hazard levels. Quasi-static subassembly tests, quasi-static and shake table tests of scaled three-story specimens, and pseudo-dynamic tests of two full-scale two-story SC-SPSWs have been conducted. As a culmination of this multi-year, multi-institutional project, this paper will present an overview of the SC-SPSW numerical and experimental research programs. This paper will also discuss innovative PT connection and web plate designs that were investigated to improve constructability, resilience, and seismic performance and that can be applied to other self-centering and steel plate shear wall systems.

关键词： self-centering     steel plate shear walls     large-scale experiment     post-tensioned connections     performance-based design    

HTML PDF 收藏

标题 作者 时间 类型 操作

Seismic fragility assessment of revised MRT buildings considering typical construction changes

Rakesh DUMARU, Hugo RODRIGUES, Humberto VARUM

期刊论文

Mechanical properties characterization of different types of masonry infill walls

André FURTADO, Hugo RODRIGUES, António ARÊDE, Humberto VARUM

期刊论文

Robust design of configurations and parameters of adaptable products

Jian ZHANG,Yongliang CHEN,Deyi XUE,Peihua GU

期刊论文

Concurrent optimization of structural topology and infill properties with a CBF-based level set method

Long JIANG, Yang GUO, Shikui CHEN, Peng WEI, Na LEI, Xianfeng David GU

期刊论文

Slender reinforced concrete shear walls with high-strength concrete boundary elements

期刊论文

Behaviour of self-centring shear walls——A state of the art review

期刊论文

Self-centring segmental retaining walls—A new construction system for retaining walls

期刊论文

Performance evaluation of waste electrical and electronic equipment disassembly layout configurations

Ozan Capraz, Olcay Polat, Askiner Gungor

期刊论文

Experiment and calculation on seismic behavior of RC composite core walls with concealed steel truss

Wanlin CAO , Weihua CHANG , Changjun ZHAO , Jianwei ZHANG ,

期刊论文

Choosing configurations of transmission line tower grounding by back flashover probability value

Dmitry KUKLIN

期刊论文

Seismic effects on reinforcement load and lateral deformation of geosynthetic-reinforced soil walls

期刊论文

Cyclic behavior of prefabricated reinforced concrete frame with infill slit shear walls

Kui XIAO,Qilin ZHANG,Bin JIA

期刊论文

Modeling of shear walls using finite shear connector elements based on continuum plasticity

Ulf Arne GIRHAMMAR, Per Johan GUSTAFSSON, Bo KÄLLSNER

期刊论文

Effect of earth reinforcement, soil properties and wall properties on bridge MSE walls

期刊论文

Self-centering steel plate shear walls for improving seismic resilience

Patricia M. CLAYTON,Daniel M. DOWDEN,Chao-Hsien LI,Jeffrey W. BERMAN,Michel BRUNEAU,Laura N. LOWES,Keh-Chuan TSAI

期刊论文